EagleTribune.com, North Andover, MA


June 29, 2014

Stopping corrosion on battery post

Could you explain why my 2011 Lincoln MKZ battery post develops green corrosion on the positive post? The mechanic at the Lincoln dealership and the service manager said that some batteries do that and it is normal. Also, the manager said the vents on the wet batteries cause the post to gather this acid and corrode. I have had at least 16 cars and a twin diesel (battery) boat and don’t remember ever having this problem. He suggested a couple of deterrents, such as a copper penny between the posts, spray-painting the post or putting a grease on the post to shield it from corrosion. Do you have a solution or idea?

I believe your battery has a poorly functioning seal between the battery post and case which is allowing vapors and/or acid to sneak up into the terminal connection. This is more of a nuisance than a problem, and you should be able to manage it during the remaining life of the battery. I’ve had fairly good luck using the red and green felt terminal protectors, placing them beneath a just-cleaned terminal. Coating the post and terminal with some “Brush-on NCP-2 Battery Corrosion Preventative” is another method that can bring relief.

If your battery terminals have crud growing atop them, there’s a good chance corrosion is working into the more critical, less visible clamp-post connection. Corroded or loose battery terminals can cause difficult or no-starting, charging system issues, and some really weird symptoms to occur with on-board electronics. The good news is vehicle damage is unlikely. It’s the symptoms that can be unpleasant. An overcharging problem could also accelerate battery leakage, but your vehicle should be able to identify such a fault and bring it to your attention.

Cleaning terminals is a fairly easy process. A check of the owner’s manual for precautions involving battery disconnection/replacement is a good first step. Yours indicates the transmission will need to undergo a learning period after reconnection to restore shift strategies and may shift a bit firmly or softly until things sweeten up. An inexpensive battery “memory saver” can be plugged into the lighter socket — make sure it’s active with the key off — providing short-term memory power while the terminals are unhooked. Most auto parts stores sell these, along with nifty terminal cleaning tools.

Text Only | Photo Reprints

Financial News
Photos of the Week