EagleTribune.com, North Andover, MA

Real Estate News

August 13, 2012

Bob Vila’s ‘Must-Do’ Projects for August

Syndicated — It's August, the summer is in full swing, and the living is easy. Well, sort of. As every homeowner will agree, there's always something to do around the house or the yard to keep things looking good and performing well.

This month is the ideal time to tackle some upgrades on your home's exterior; simple, inexpensive things that you can accomplish on your own to boost the curb appeal of your home - its resale value.

And with the days growing continually shorter, the time to start is now. Here are my five "must-do" projects for August:

Update your front entry

Improving the entrance to your home is a relatively easy thing to do. Add some color by painting the front door in a fresh coat of gloss paint, or strip it down to the natural wood. Consider container gardens or shutters to provide additional interest. And replace outdated exterior wall sconces with more stylish models. If you are looking to do the latter, here's all you need:

Materials and tools

  • New exterior wall light fixture
  • Wire nuts (if not included)
  • Multi-head screwdriver
  • Pliers
  • Lightbulb
  • Electrical tape (optional)

Directions

  1. Turn off the power. You will need to go to the main circuit breaker of the house to shut off the power to the existing light fixture. Don't think that having the light switch "off" is a sure-fire way to cut the power entirely. It's not!
  2. Remove the old fixture. The existing fixture will be attached to the wall with either a mounting cover plate or exposed screws. If the former, lift the plate off to reveal the mounting screws. Loosen and remove the screws while holding the fixture in place until you disconnect the wires.
  3. The mounting bracket. Chances are the old light fixture was affixed to the wall with a crossbar mounting bracket. You should replace it with the mounting hardware that came packaged with your new fixture. Depending on the style of lantern, the crossbar is either a 4-inch circle of metal with several holes cut in it, a 4-inch by 1-inch metal plate with several holes, or two 4-inch by 1-inch metal plates connected in the center to form a cross.
  4. Wiring 101. Connect the wires according to the manufacturer's instructions: white (neutral) to white, black (hot) to black and green (ground) wire to the bare copper wire from the junction box. Use plastic wire screws to keep wire connections secure. (You can also choose to secure connections with electrical tape.) Pack all the wires back inside the outlet box, making certain not to loosen connections.
  5. Installing the new lantern. Attach the lantern to the crossbar with the mounting screws provided, or position it onto the protruding screws and affix the hex nuts packaged with the lamp. Secure tightly. Depending on the contour of the wall siding, you may need to put a bead of clear caulking along the top and sides to prevent water from seeping behind the fixture. (Another option is a foam mounting block cut to fit the contour of the siding.)
  6. Power on. Turn the power back on at the circuit breaker and test out your new fixture.

Text Only | Photo Reprints
Latest News
Real Estate News

NDN Video
Couple Channel Grief Into Soldiers' Retreat WWI Aviation Still Alive at Aerodrome in NY Raw: Rescuers at Taiwan Explosion Scene Raw: Woman Who Faced Death Over Faith in N.H. Clinton Before 9-11: Could Have Killed Bin Laden Netanyahu Vows to Destroy Hamas Tunnels Obama Slams Republicans Over Lawsuit House Leaders Trade Blame for Inaction Malaysian PM: Stop Fighting in Ukraine Cantor Warns of Instability, Terror in Farewell Ravens' Ray Rice: 'I Made a Huge Mistake' Florida Panther Rebound Upsets Ranchers Small Plane Crash in San Diego Parking Lot Busy Franco's Not Afraid of Overexposure Fighting Blocks Access to Ukraine Crash Site Dangerous Bacteria Kills One in Florida Workers Dig for Survivors After India Landslide Texas Scientists Study Ebola Virus Smartphone Powered Paper Plane Debuts at Airshow Southern Accent Reduction Class Cancelled in TN
Photos of the Week